Our audio rack corner bracket kit is the ultimate Do-It-Yourself audio case on the market. Cut your own 1/2" panels and use our brackets to build your own custom 19 inch rackmount. Or, get our kit bundled with panels, handles, feet, and other accessories and have fun assembling it yourself.
This kit is for panels measuring 10, 12, or 14 inches deep, front-to-back. Each kit comes with four corner brackets and eight Phillips head screws per bracket.
If you are cutting your own 12mm (1/2 inch) thick panels, here are our recommended sizes:
- Tops and Bottoms will be 20.125 (20-1/8) inches wide
- Sides will be 0.125 (1/8) inches taller than the rack rails
- Depth is 10, 12, or 14 inches. We suggest waiting until you receive the brackets to cut the final depth as measurements are +/- 0.0625 (1/16) inches.
- NOTE: If using above measurements, top and bottom panels will overlap the side panels. This will give you an inside width of approximately 19.1875 (19-3/16) inches. After rails are installed, you should have 18.25 (18-1/4) inches from the center holes of one rail across to the center holes of the other rail, +/- 0.0625 (1/16) inches.