Can you recess the rack rails 1" instead of the normal .5"?
A: Yes, you can customize the rail inset for no additional charge. Add the rack to your cart. On the checkout page, there is a place to leave comments. Just enter what inset you would like. For example: "1 inch rail inset".
Q: How are you guys joining the top, and bottoms to the sides on the Birch 9-Ply racks?
A: We use wood glue and brad nails. Nail heads are set and filled to match the wood.
Q: does this item include one each of the 2 3 4 and 6 racks?
A: No. This product listing is for one rack, as noted in the description. Choose the size required in the drop-down menu option.
Q: re Baltic Birch cabinets: Please explain the 1U,2U,3U desiganations.
I have two amps, three medium din components.
I would like to understand the designations so i can order the right setup.
The 1U, 2U, 3U, etc. is the number of rack spaces. One rack space is 1.75 inches. Two rack spaces is 3.5 inches...and so on. Let me know if you need further assistance at [email protected]
Q: Wich model of small rack does fit a BEHRINGER (FBQ3102HD and a Behringer Power Amplifier (A800)? I think that is the 4U model. Am I rght? Thanks in advance
A: The EQ is 2U and the amplifier is also 2U. So, yes, 4U is correct.
Q: can I get the birch baltic 2RU rack with rails mounted in front AND in back?
if so, about how much? thanks!
A: Yes, we can do rear rack rails on a 2U rack for an additional $18.49. Please send us a message through the contact page to request an invoice for an order.
Q: 2 questions.
Can a Baltic birch rack be made with the finger joints like your hard wood racks? I want to use a rack for live applications in clubs etc.
Can these racks be ordered with a 10” depth.
A: Yes, we can make these 10 inches deep. The price would be the same as the standard depth. On the checkout page, there is a text box for comments. Enter "Build 10 inches deep". We will see this and enter it in to your order manually.
No, we cannot finger joint the plywood racks.
Q: If I order two 6u made of the birch, can you leave the rails off one of them?
A: Yes. Please leave a note in the comments box on the checkout page and we can do this for you.
Q: It appears that your racks would also fit networking equipment. I have a Ubiquiti switch with the following measurements (17.44" W x 1.69" H x 8.70" D). Would that fit?
A: That is correct. IT equipment follows the same standard for rack mounting as audio equipment. It will fit perfect.
Q: Does this unit ship to Melbourne, Australia? If so how much would the shipping be?
A: We ship to Australia often. Our shopping cart supports estimates to Australia. Just add the size of rack you want and use the shipping estimate on the view cart page or checkout page.
Can these be made with a 20" depth?
A: Yes, we can customize the depth. Please submit a quote request through our contact page. Be sure and include your shipping address so we can calculate shipping for you to get a complete quote.
Q: Howdy Guys!
Do you build 1U half rack birch boxes?
If so do you know how much it would cost and how much it would weigh by any chance?
A: Yes, we can build half-width racks. Please send a quote request through the contact page and we will get you an estimate quickly.
Q: so i have a vintage master room reverb, a new heritage audio dual preamp, most rack mounts have an industry standard space size correct. ? thanks.
A: Most rack mount units do have a standard size. Some vintage gear does not follow the standard. 1 rack unit (1U) is 19 inches wide and 1.75 inches tall.
Q: Couple of questions concerning your Baltic Birch 9-Ply Lightweight Studio Equipment Rack.
(1) Your on-line description reads: "These racks are sprayed with a clear acrylic finish." But "clear acrylic finish" does not appear on the corresponding drop down menu on the Description page. Is this because what shows up as "Unfinished" is actually "clear acrylic finish?"
(2) For the 1U rack, there are no flip handle options. Could I nevertheless order one with your surface mount handles (or, if not possible, order the handles separately and install them myself)?
Thanks. Jon S.
A: Great questions.
The clear acrylic finish is our "clear lacquer" option. We use an acrylic lacquer.
The surface mount flip handle body is 3-3/16" tall. The outside height of the 1U rack is 3-5/16". This is the only reason we don't offer installation of the handles. They will fit, but look a bit bulky. You can certainly add the handles to your order and install them yourself.
Q: Can you stack these racks? And how much load can they take, without sagging? I plan on putting equipment weight between 10-20 lbs into a rack, stacking three.
A: These racks can be stacked. The top and bottom panels overlap the side panels, making them as strong as possible. The weight capacity of these is 60 pounds or less.
Q: Can you build one without the polyurethane varnish?
A: Yes. You will see an unfinished option.